| SERVICE BULLETIN LIST |
| | | | |
Doc. No. | Description | Rev. | Date | Downl. |
OSB42-001/2 | Retrofit installation of design changes | 2 | 2006-05-12 | 
|
SB42-002 | | - | - | N/A |
MSB42-003 | Thielert Software m2.7 | - | 2005-04-30 | 
|
MSB42-005
| One engine inoperative climb/decent performance data
| -
| 2005-08-08
| N/A |
MSB42-006/1 | Exchange of the safety walk on the wing stubs | 1 | 2005-09-20 | 
|
MSB42-007/10 | Software for TAE engine | 10 | 2011-11-11 | 
|
MSB42-008/13 | Software for Garmin G1000 | 13 | 2011-01-17 | 
|
OSB42-009 | Cargo door hinges | - | 2006-03-23 | 
|
MSB42-010/1 | Relocation of Configuration Module, KCM 100 | 1 | 2005-11-09 | 
|
OSB42-013 | Installation of an auxiliary fuel tank | - | 2006-02-02 | 
|
OSB42-014/4 | Increase of maximum take off mass | 4 | 2006-04-18 | 
|
OSB42-015/4 | Installation of ice protection system | 4 | 2008-03-27 | 
|
MSB42-016/2 | Installation Improved Breather Line | 2 | 2007-02-14 | 
|
MSB42-017 | Oil lines | - | 2006-02-21 | 
|
OSB42-018 | Installation of a WX-500 Stormscope | - | 2006-02-22 | 
|
MSB42-019/4 | Exchange of the Auxiliary Fuel Tank check valve and installation of additional filter | 4 | 2006-08-01 | 
|
OSB42-020 | Improvement of heating system | - | 2006-06-21 | 
|
MSB42-021 | Inspection of clearance of exhaust pipe | - | 2006-06-13 | 
|
OSB42-023 | Optional retrofit installation of an oxygen system | - | 2006-07-25 | 
|
MSB42-024/3 | Installation of Propeller System Check valve Bracket | 3 | 2006-09-19 | 
|
RSB42-025 | Improved Fuel Probe | - | 2006-10-02 | 
|
MSB42-027/1 | Engine Controls - Electrical Harness, incl. WI Rev. 2 | 1 | 2007-02-14 | 
|
MSB42-028 | Engine Controls - Electrical Harness - Sealant | - | 2006-10-02 | 
|
RSB42-029 | Installation of Additional Positioning Pins for the Canopy | - | 2006-09-27 | 
|
MSB42-030/2 | Check of return fuel line installation on Common Rail | 2 | 2006-12-20 | 
|
MSB42-031/1 | Inspection and repair of MLG brace rib | 1 | 2007-04-05 | 
|
MSB42-032/1 | Auxiliary Fuel Tank, Ventilation Hole, Inspection | 1 | 2007-01-24 | 
|
MSB42-035 | Coolant Tank Cap Pressure Relieve Test (inkl. WI Rev. 1) | - | 2006-12-07 | 
|
RSB42-036 | Installation of a Water Separator in the MAP-Lines of the ECU | - | 2007-02-08 | 
|
MSB42-038/2 | Installation of a Modified Water Tube Bracket | 2 | 2007-07-26 | 
|
MSB42-039 | Installation of a Redesigned Breather Line and a New Oil Separator | - | 2007-03-26 | 
|
OSB42-040 | Installation of ECU P/N 02-7610-55181R1 | - | 2007-03-28 | 
|
RSB42-041/1 | Welding reinforcement of the cabin heat exchanger (RH-engine) and defrost heat exchanger (LH-engine), P/N D60-2140-10-00 | 1 | 2007-07-26 | 
|
MSB42-042/1 | Installation of additional ECU Backup Batteries incl. WI-MSB42-042 Rev. 2 incl. EASA-AD No. 2007-0183 R2 | 1 | 2007-08-08 | 
|
MSB42-043/1 | Replacement of aileron bellcrank located in the wing and replacement of a bent rod end | 1 | 2008-04-03 | 
|
OSB42-046/2 | Retrofit of the TAE 125-02-99 engine | 2 | 2011-04-01 | 
|
OSB42-050/1 | Installation of additional ECU Backup Batteries sufficient for at least 30 Minutes Engine Operation incl. WI-OSB42-050 R2 incl. EASA-AD No. 2007-0183 R2 | 1 | 2007-10-15 | 
|
OSB42-051 | Installation of a Comant CI120/GS NAV/LOC/GS Antenna on the vertical fin | - | 2007-12-18 | 
|
MSB42-055 | Water Circulation Installation | - | 2008-01-10 | 
|
OSB42-056 | Conversion of a Standard DA 42 to a DA 42 M | - | 2008-02-28 | 
|
OSB42-057 | Installation of an Additional Exhaust End Pipe | - | 2008-05-19 | 
|
MSB42-058 | Wire Secured Bolts for Engine Support TAE125-01 incl. WI Rev. 1
| - | 2008-05-21 | 
|
OSB42-061 | Import requirements to CIS | - | 2011-07-11 | 
|
MSB42-062/1 | Replacement of the Landing Gear - Downlock Pin incl. WI Rev. 1
| 1 | 2008-11-13 |
|
MSB42-063/1
| Inspection and Modifications of the NLG centering unit mount
| 1 | 2010-01-22 |
|
OSB42-065/1 | Installation of an Alternative Main Battery | 1 | 2009-11-27 |
|
RSB42-066 | Replacement of the check valve at the auxiliary tank (LH & RH) with a solenoid valve | - | 2008-12-04 | 
|
OSB42-068/1
| Conversion of DA 42 Aircraft to variant DA 42 NG
| 1 | 2010-06-17 | 
|
MSB42-070/1 | Inspection of NLG Tubular Pivot Assembly incl. WI Rev. 2
| 1 | 2009-06-24 |
|
OSB42-071/1 | NG Safety Walk Installation on DA 42 Aircraft (EASA-AD A-2005-003 4. C. i
| 1 | 2010-01-08 | 
|
RSB42-072/2
| Application of an approved sealant on the fire sensor or replacement by a sealed fire sensor, incl. WI Rev. 1
| 2 | 2010-04-22 | 
|
MSB42-074/3
| Reinforcement of the supporting structure in NLG-Box incl. WI Rev. 2
| 3 | 2010-01-29 |
|
OSB42-075 | Use of Diesel Fuel (EN 590) on DA 42 aircraft | - | 2009-09-21 |
|
MSB42-076
| Sealing of Holes in the Firewall
| - | 2010-06-07 | 
|
MSB42-077 | Check of emergency exit lever | - | 2010-07-14 | 
|
OSB42-078
| Installation of a Coated Safety Walk
| - | 2010-05-20 | 
|
RSB42-080 | Installation of Suppressor Diodes at the ECU Relays
| - | 2010-04-02 | 
|
OSB42-081/1 | Conversion of DA 42 M aircraft to variant DA 42 M-NG
| 1 | 2010-12-23 | 
|
OSB42-082 | Changing DA 42 M / DA 42 M-NG aircraft from restricted to normal type certification | - | 2010-03-17 | 
|
MSB42-083 | Replacement of the passenger door retaining bracket | - | 2010-07-13 | 
|
OSB42-085 | Installation of vibration and cabin noise reduction measures in the floor panel | - | 2010-10-14 | 
|
MSB42-087/1 | Inspection of rudder control system and NLG steering bracket | 1 | 2010-11-15 | 
|
MSB42-088/3 | Inspection of MLG joint | 3 | 2011-03-08 | 
|
RSB42-089/1 | Replacement of Seals in Main Landing Gear Damper | 1 | 2011-04-19 | 
|
MSB42-091 | Main Landing Gear Bearing Housing | - | 2011-06-28 | 
|
MSB42-092 | Center Wing - Skin to Spar Bond, EASA-AD 2011-0100 | - | 2011-05-20 | 
|
RSB42-094 | Installation of a stiffener on the alternator cable | - | 2011-11-22 | 
|
MSB42-095 | Replacement of MLG damper nut, EASA-AD 2011-0100 | - | 2011-11-11 | 
|